djigzo_3.0.5-0 Centos7 mysql

Gateway
1

Dear All,

In the above configuration, installed according to the instructions, everything appears to be fine except for the MTA-Configuration under "Admin".

That leads to the following two errors:

- MTA -> config: "Render queue error in BeforeRenderTemplate[admin/mta/Config:relaydomains]: Failure reading parameter 'model' of component admin/mta/Config:relaydomains: ProcessException: Error running [/usr/local/djigzo/scripts/execute-script.sh,postfix-main-config,-g]. exit value: 1 (1), Class: class mitm.common.util.ProcessException"

- MTA -> sasl: "Render queue error in SetupRender[admin/mta/SaslPasswords:grid]: Failure reading parameter 'source' of component admin/mta/SaslPasswords:grid: ProcessException: Error running [/usr/local/djigzo/scripts/execute-script.sh,sasl,get]. exit value: 1 (1), Class: class mitm.common.util.ProcessException"

Under /usr/local/djigzo/scripts/, I find a lot of shell scripts owned by root:root with permissions 0755 plus links in the scripts.d subdirectory as created according to page 16 of the installation guide.

Can someone please point me at how to resolve this?

Regards,

Michael

2

Dear All,

In the above configuration, installed according to the instructions,
everything appears to be fine except for the MTA-Configuration under
"Admin".

That leads to the following two errors:

- MTA -> config: "Render queue error in
BeforeRenderTemplate[admin/mta/Config:relaydomains]: Failure reading
parameter 'model' of component admin/mta/Config:relaydomains:
ProcessException: Error running
[/usr/local/djigzo/scripts/execute-script.sh,postfix-main-config,-g].
exit value: 1 (1), Class: class mitm.common.util.ProcessException"

- MTA -> sasl: "Render queue error in
SetupRender[admin/mta/SaslPasswords:grid]: Failure reading parameter
'source' of component admin/mta/SaslPasswords:grid: ProcessException:
Error running [/usr/local/djigzo/scripts/execute-script.sh,sasl,get].
exit value: 1 (1), Class: class mitm.common.util.ProcessException"

Under /usr/local/djigzo/scripts/, I find a lot of shell scripts owned
by root:root with permissions 0755 plus links in the scripts.d
subdirectory as created according to page 16 of the installation
guide.

Is there a specific reason you used the tar installation and not the
RPMs? Using the RPMs is highly recommended because it makes upgrading to
newer releases easier.

Can someone please point me at how to resolve this?

Can you run the following two commands on the command line and report
the result:

sudo -u djigzo /usr/share/djigzo/scripts/execute-script.sh
postfix-main-config -g

sudo -u djigzo /usr/share/djigzo/scripts/execute-script.sh sasl get

Kind regards,

Martijn Brinkers

···

On 06/03/2016 06:44 PM, Prof. Dr. Michael Schefczyk wrote:

--
CipherMail email encryption

Email encryption with support for S/MIME, OpenPGP, PDF encryption and
secure webmail pull.

Twitter: http://twitter.com/CipherMail

--
CipherMail email encryption

Email encryption with support for S/MIME, OpenPGP, PDF encryption and
secure webmail pull.

Twitter: http://twitter.com/CipherMail

3

Dear All,

In the above configuration, installed according to the instructions,
everything appears to be fine except for the MTA-Configuration under
"Admin".

That leads to the following two errors:

- MTA -> config: "Render queue error in
BeforeRenderTemplate[admin/mta/Config:relaydomains]: Failure reading
parameter 'model' of component admin/mta/Config:relaydomains:
ProcessException: Error running
[/usr/local/djigzo/scripts/execute-script.sh,postfix-main-config,-g].
exit value: 1 (1), Class: class mitm.common.util.ProcessException"

- MTA -> sasl: "Render queue error in
SetupRender[admin/mta/SaslPasswords:grid]: Failure reading parameter
'source' of component admin/mta/SaslPasswords:grid: ProcessException:
Error running [/usr/local/djigzo/scripts/execute-script.sh,sasl,get].
exit value: 1 (1), Class: class mitm.common.util.ProcessException"

Under /usr/local/djigzo/scripts/, I find a lot of shell scripts owned
by root:root with permissions 0755 plus links in the scripts.d
subdirectory as created according to page 16 of the installation
guide.

Is there a specific reason you used the tar installation and not the RPMs? Using the RPMs is highly recommended because it makes upgrading to newer releases easier.

Can someone please point me at how to resolve this?

Can you run the following two commands on the command line and report the result:

sudo -u djigzo /usr/share/djigzo/scripts/execute-script.sh
postfix-main-config -g

sudo -u djigzo /usr/share/djigzo/scripts/execute-script.sh sasl get

Kind regards,

Martijn Brinkers

Thank you very much! Something (I do not understand this on the spot) is wrong with the sudoers setup:

sudo -u djigzo /usr/share/djigzo/scripts/execute-script.sh postfix-main-config -g

sudo: >>> /etc/sudoers.d/ciphermail: syntax error near line 4 <<<
sudo: parse error in /etc/sudoers.d/ciphermail near line 4
sudo: no valid sudoers sources found, quitting
sudo: unable to initialize policy plugin

content of /etc/sudoers.d/ciphermail
User_Alias DJIGZO_USERS = djigzo
Cmnd_Alias DJIGZO_COMMANDS = /usr/local/djigzo/scripts/do-execute-script.sh
DJIGZO_USERS ALL=(ALL) NOPASSWD: DJIGZO_COMMANDS
Defaults:root,djigzo !requiretty

4

Look normal to me. I did a copy-paste of the above sudoers fragment and
it worked without problems on my CentOS 7 installation.

What command are you using to edit the sudoers fragment? could there be
a DOS line ending? (not even sure whether that matters).

The error is on the following line? :

Defaults:root,djigzo !requiretty

Kind regards,

Martijn Brinkers

···

On 06/03/2016 07:09 PM, Prof. Dr. Michael Schefczyk wrote:

Dear All,

In the above configuration, installed according to the instructions,
everything appears to be fine except for the MTA-Configuration under
"Admin".

That leads to the following two errors:

- MTA -> config: "Render queue error in
BeforeRenderTemplate[admin/mta/Config:relaydomains]: Failure reading
parameter 'model' of component admin/mta/Config:relaydomains:
ProcessException: Error running
[/usr/local/djigzo/scripts/execute-script.sh,postfix-main-config,-g].
exit value: 1 (1), Class: class mitm.common.util.ProcessException"

- MTA -> sasl: "Render queue error in
SetupRender[admin/mta/SaslPasswords:grid]: Failure reading parameter
'source' of component admin/mta/SaslPasswords:grid: ProcessException:
Error running [/usr/local/djigzo/scripts/execute-script.sh,sasl,get].
exit value: 1 (1), Class: class mitm.common.util.ProcessException"

Under /usr/local/djigzo/scripts/, I find a lot of shell scripts owned
by root:root with permissions 0755 plus links in the scripts.d
subdirectory as created according to page 16 of the installation
guide.

Is there a specific reason you used the tar installation and not the RPMs? Using the RPMs is highly recommended because it makes upgrading to newer releases easier.

Can someone please point me at how to resolve this?

Can you run the following two commands on the command line and report the result:

sudo -u djigzo /usr/share/djigzo/scripts/execute-script.sh
postfix-main-config -g

sudo -u djigzo /usr/share/djigzo/scripts/execute-script.sh sasl get

Kind regards,

Martijn Brinkers

Thank you very much! Something (I do not understand this on the spot) is wrong with the sudoers setup:

sudo -u djigzo /usr/share/djigzo/scripts/execute-script.sh postfix-main-config -g

sudo: >>> /etc/sudoers.d/ciphermail: syntax error near line 4 <<<
sudo: parse error in /etc/sudoers.d/ciphermail near line 4
sudo: no valid sudoers sources found, quitting
sudo: unable to initialize policy plugin

content of /etc/sudoers.d/ciphermail
User_Alias DJIGZO_USERS = djigzo
Cmnd_Alias DJIGZO_COMMANDS = /usr/local/djigzo/scripts/do-execute-script.sh
DJIGZO_USERS ALL=(ALL) NOPASSWD: DJIGZO_COMMANDS
Defaults:root,djigzo !requiretty

--
CipherMail email encryption

Email encryption with support for S/MIME, OpenPGP, PDF encryption and
secure webmail pull.

Twitter: http://twitter.com/CipherMail

5

Look normal to me. I did a copy-paste of the above sudoers fragment and it worked without problems on my CentOS 7 installation.

What command are you using to edit the sudoers fragment? could there be a DOS line ending? (not even sure whether that matters).

The error is on the following line? :

Defaults:root,djigzo !requiretty

Kind regards,

Martijn Brinkers

···

On 06/03/2016 07:09 PM, Prof. Dr. Michael Schefczyk wrote:

Dear All,

In the above configuration, installed according to the instructions,
everything appears to be fine except for the MTA-Configuration under
"Admin".

That leads to the following two errors:

- MTA -> config: "Render queue error in
BeforeRenderTemplate[admin/mta/Config:relaydomains]: Failure reading
parameter 'model' of component admin/mta/Config:relaydomains:
ProcessException: Error running
[/usr/local/djigzo/scripts/execute-script.sh,postfix-main-config,-g].
exit value: 1 (1), Class: class mitm.common.util.ProcessException"

- MTA -> sasl: "Render queue error in
SetupRender[admin/mta/SaslPasswords:grid]: Failure reading parameter
'source' of component admin/mta/SaslPasswords:grid: ProcessException:
Error running [/usr/local/djigzo/scripts/execute-script.sh,sasl,get].
exit value: 1 (1), Class: class mitm.common.util.ProcessException"

Under /usr/local/djigzo/scripts/, I find a lot of shell scripts owned
by root:root with permissions 0755 plus links in the scripts.d
subdirectory as created according to page 16 of the installation
guide.

Is there a specific reason you used the tar installation and not the RPMs? Using the RPMs is highly recommended because it makes upgrading to newer releases easier.

Can someone please point me at how to resolve this?

Can you run the following two commands on the command line and report the result:

sudo -u djigzo /usr/share/djigzo/scripts/execute-script.sh
postfix-main-config -g

sudo -u djigzo /usr/share/djigzo/scripts/execute-script.sh sasl get

Kind regards,

Martijn Brinkers

Thank you very much! Something (I do not understand this on the spot) is wrong with the sudoers setup:

sudo -u djigzo /usr/share/djigzo/scripts/execute-script.sh
postfix-main-config -g

sudo: >>> /etc/sudoers.d/ciphermail: syntax error near line 4 <<<
sudo: parse error in /etc/sudoers.d/ciphermail near line 4
sudo: no valid sudoers sources found, quitting
sudo: unable to initialize policy plugin

content of /etc/sudoers.d/ciphermail
User_Alias DJIGZO_USERS = djigzo
Cmnd_Alias DJIGZO_COMMANDS =
/usr/local/djigzo/scripts/do-execute-script.sh
DJIGZO_USERS ALL=(ALL) NOPASSWD: DJIGZO_COMMANDS Defaults:root,djigzo
!requiretty

--
CipherMail email encryption

Email encryption with support for S/MIME, OpenPGP, PDF encryption and secure webmail pull.

Twitter: http://twitter.com/CipherMail
_______________________________________________
Users mailing list
Users(a)lists.djigzo.com
https://lists.djigzo.com/lists/listinfo/users

Dear Martijn,

Thank you very much, that was it! I did copy the content from the instruction pdf on a Windows PC using Webmin running on Centos 7. Editing the file in question by replacing the line breaks using vi on the command line did solve it. Not really "visible" - thank you very much for catching it!

Regards,

Michael