# Newbie problem with setup

**URL:** <https://community.ciphermail.com/t/newbie-problem-with-setup/199>\
**Category:** Gateway\
**Created:** [May 26, 2011, 3:41pm UTC](https://community.ciphermail.com/t/newbie-problem-with-setup/199 "2011-05-26T15:41:03Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jeffery\_Hallett](https://avatars.discourse-cdn.com/v4/letter/j/a587f6/32.png) [@Jeffery\_Hallett](https://community.ciphermail.com/u/Jeffery_Hallett)\
**Post date:** [May 26, 2011, 3:41pm UTC](https://community.ciphermail.com/t/newbie-problem-with-setup/199/1 "2011-05-26T15:41:03Z")

</div>

I'm currently letting my router assign the djigzo an IP address from DHCP.  
If I assign it manually I would do this, but I need help filling in the  
last two items.

Config \> Network...

Network config  
address: 192.168.168.45  
gateway: 192.168.168.1  
netmask: 255.255.255.0  
network: [what goes in here?]  
broadcast: [what goes in here?]

Jeff

---

<div class="post-metadata">

**Author:** ![martijn](https://dub1.discourse-cdn.com/flex017/user_avatar/community.ciphermail.com/martijn/32/127_2.png) [@martijn](https://community.ciphermail.com/u/martijn)\
**Post date:** [May 26, 2011, 3:43pm UTC](https://community.ciphermail.com/t/newbie-problem-with-setup/199/2 "2011-05-26T15:43:21Z")

</div>

leave network and broadcast empty

Martijn

> **···**
>
> On 05/26/2011 05:41 PM, jhallett(a)mindea.com wrote:
> 
> > I'm currently letting my router assign the djigzo an IP address from DHCP.  
> > If I assign it manually I would do this, but I need help filling in the  
> > last two items.
> > 
> > Config \> Network...
> > 
> > Network config  
> > address: 192.168.168.45  
> > gateway: 192.168.168.1  
> > netmask: 255.255.255.0  
> > network: [what goes in here?]  
> > broadcast: [what goes in here?]
> 
> --  
> Djigzo open source email encryption

---

<div class="post-metadata">

**Author:** ![lst\_hoe021](https://avatars.discourse-cdn.com/v4/letter/l/58956e/32.png) [@lst\_hoe021](https://community.ciphermail.com/u/lst_hoe021)\
**Post date:** [May 26, 2011, 3:48pm UTC](https://community.ciphermail.com/t/newbie-problem-with-setup/199/3 "2011-05-26T15:48:31Z")

</div>

Zitat von jhallett(a)mindea.com:

> I'm currently letting my router assign the djigzo an IP address from DHCP.  
> If I assign it manually I would do this, but I need help filling in the  
> last two items.
> 
> Config \> Network...
> 
> Network config  
> address: 192.168.168.45  
> gateway: 192.168.168.1  
> netmask: 255.255.255.0  
> network: [what goes in here?]  
> broadcast: [what goes in here?]

Looks good and as you said works inside your home network? You can  
ping the internal interface of the router but it don't let you out. So  
you have to check what happens on the router. Do you have to  
"whitelist" devices which are allowed to connect to the internet?

Regards

Andreas