# Cannot create external user certificate with e-mail enabled

**URL:** <https://community.ciphermail.com/t/cannot-create-external-user-certificate-with-e-mail-enabled/153>\
**Category:** Gateway\
**Created:** [December 21, 2010, 11:31pm UTC](https://community.ciphermail.com/t/cannot-create-external-user-certificate-with-e-mail-enabled/153 "2010-12-21T23:31:15Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Worsham\_Michael](https://avatars.discourse-cdn.com/v4/letter/w/ac91a4/32.png) [@Worsham\_Michael](https://community.ciphermail.com/u/Worsham_Michael)\
**Post date:** [December 21, 2010, 11:31pm UTC](https://community.ciphermail.com/t/cannot-create-external-user-certificate-with-e-mail-enabled/153/1 "2010-12-21T23:31:15Z")

</div>

I am following the steps in the S/MIME Setup PDF document for creating a external user certificate, but I keep running into the same error.

Under the steps for section 3.3, when I do all of the listed steps, I get this error to appear:  
"The issued certificate can only be sent when the CA email address is specified. See CA settings."

-- Michael

> **···**
>
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> CONFIDENTIALITY NOTICE: This email and any attachments are intended solely for the use of the named recipient(s). This email may contain confidential and/or proprietary information of Scientific Research Corporation. If you are not a named recipient, you are prohibited from reviewing, copying, using, disclosing or distributing to others the information in this email and attachments. If you believe you have received this email in error, please notify the sender immediately and permanently delete the email, any attachments, and all copies thereof from any drives or storage media and destroy any printouts of the email or attachments.
> 
> EXPORT COMPLIANCE NOTICE: This email and any attachments may contain technical data subject to U.S export restrictions under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). Export or transfer of this technical data and/or related information to any foreign person(s) or entity(ies), either within the U.S. or outside of the U.S., may require advance export authorization by the appropriate U.S. Government agency prior to export or transfer. In addition, technical data may not be exported or transferred to certain countries or specified designated nationals identified by U.S. embargo controls without prior export authorization. By accepting this email and any attachments, all recipients confirm that they understand and will comply with all applicable ITAR, EAR and embargo compliance requirements.

---

<div class="post-metadata">

**Author:** ![martijn](https://dub1.discourse-cdn.com/flex017/user_avatar/community.ciphermail.com/martijn/32/127_2.png) [@martijn](https://community.ciphermail.com/u/martijn)\
**Post date:** [December 22, 2010, 12:27am UTC](https://community.ciphermail.com/t/cannot-create-external-user-certificate-with-e-mail-enabled/153/2 "2010-12-22T00:27:17Z")

</div>

> Under the steps for section 3.3, when I do all of the listed steps, I  
> get this error to appear: "The issued certificate can only be sent  
> when the CA email address is specified. See CA settings."

It seems that something is missing to the step-by-step guide. You should  
specify the CA sender. See section "13.2 CA settings" (page 41) of the  
administration guide.

I will add the missing step to the s/mime setup guide.

Thanks,

Martijn Brinkers

> **···**
>
> On 12/22/2010 12:31 AM, Worsham, Michael wrote:
> 
> > I am following the steps in the S/MIME Setup PDF document for creating a external user certificate, but I keep running into the same error.
> > 
> > Under the steps for section 3.3, when I do all of the listed steps, I get this error to appear:  
> > "The issued certificate can only be sent when the CA email address is specified. See CA settings."
> > 
> > -- Michael
> > 
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > CONFIDENTIALITY NOTICE: This email and any attachments are intended solely for the use of the named recipient(s). This email may contain confidential and/or proprietary information of Scientific Research Corporation. If you are not a named recipient, you are prohibited from reviewing, copying, using, disclosing or distributing to others the information in this email and attachments. If you believe you have received this email in error, please notify the sender immediately and permanently delete the email, any attachments, and all copies thereof from any drives or storage media and destroy any printouts of the email or attachments.
> > 
> > EXPORT COMPLIANCE NOTICE: This email and any attachments may contain technical data subject to U.S export restrictions under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). Export or transfer of this technical data and/or related information to any foreign person(s) or entity(ies), either within the U.S. or outside of the U.S., may require advance export authorization by the appropriate U.S. Government agency prior to export or transfer. In addition, technical data may not be exported or transferred to certain countries or specified designated nationals identified by U.S. embargo controls without prior export authorization. By accepting this email and any attachments, all recipients confirm that they understand and will comply with all applicable ITAR, EAR and embargo compliance requirements.  
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > Users mailing list  
> > Users(a)lists.djigzo.com  
> > [http://lists.djigzo.com/lists/listinfo/users](http://lists.djigzo.com/lists/listinfo/users)
> 
> --  
> Djigzo open source email encryption

---

<div class="post-metadata">

**Author:** ![lst\_hoe021](https://avatars.discourse-cdn.com/v4/letter/l/58956e/32.png) [@lst\_hoe021](https://community.ciphermail.com/u/lst_hoe021)\
**Post date:** [December 22, 2010, 9:17am UTC](https://community.ciphermail.com/t/cannot-create-external-user-certificate-with-e-mail-enabled/153/3 "2010-12-22T09:17:41Z")

</div>

Zitat von Martijn Brinkers \<martijn(a)djigzo.com\>:

> **···**
>
> > > Under the steps for section 3.3, when I do all of the listed steps, I  
> > > get this error to appear: "The issued certificate can only be sent  
> > > when the CA email address is specified. See CA settings."
> > 
> > It seems that something is missing to the step-by-step guide. You should  
> > specify the CA sender. See section "13.2 CA settings" (page 41) of the  
> > administration guide.
> > 
> > I will add the missing step to the s/mime setup guide.
> > 
> > Thanks,
> > 
> > Martijn Brinkers
> > 
> > On 12/22/2010 12:31 AM, Worsham, Michael wrote:
> > 
> > > I am following the steps in the S/MIME Setup PDF document for  
> > > creating a external user certificate, but I keep running into the  
> > > same error.
> > > 
> > > Under the steps for section 3.3, when I do all of the listed steps,  
> > > I get this error to appear:  
> > > "The issued certificate can only be sent when the CA email address  
> > > is specified. See CA settings."
> > > 
> > > -- Michael
> > > 
> > > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > > CONFIDENTIALITY NOTICE: This email and any attachments are intended  
> > > solely for the use of the named recipient(s). This email may  
> > > contain confidential and/or proprietary information of Scientific  
> > > Research Corporation. If you are not a named recipient, you are  
> > > prohibited from reviewing, copying, using, disclosing or  
> > > distributing to others the information in this email and  
> > > attachments. If you believe you have received this email in error,  
> > > please notify the sender immediately and permanently delete the  
> > > email, any attachments, and all copies thereof from any drives or  
> > > storage media and destroy any printouts of the email or attachments.
> > > 
> > > EXPORT COMPLIANCE NOTICE: This email and any attachments may  
> > > contain technical data subject to U.S export restrictions under the  
> > > International Traffic in Arms Regulations (ITAR) or the Export  
> > > Administration Regulations (EAR). Export or transfer of this  
> > > technical data and/or related information to any foreign person(s)  
> > > or entity(ies), either within the U.S. or outside of the U.S., may  
> > > require advance export authorization by the appropriate U.S.  
> > > Government agency prior to export or transfer. In addition,  
> > > technical data may not be exported or transferred to certain  
> > > countries or specified designated nationals identified by U.S.  
> > > embargo controls without prior export authorization. By accepting  
> > > this email and any attachments, all recipients confirm that they  
> > > understand and will comply with all applicable ITAR, EAR and  
> > > embargo compliance requirements.  
> > > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > > Users mailing list  
> > > Users(a)lists.djigzo.com  
> > > [http://lists.djigzo.com/lists/listinfo/users](http://lists.djigzo.com/lists/listinfo/users)
> > 
> > --  
> > Djigzo open source email encryption

---

<div class="post-metadata">

**Author:** ![lst\_hoe021](https://avatars.discourse-cdn.com/v4/letter/l/58956e/32.png) [@lst\_hoe021](https://community.ciphermail.com/u/lst_hoe021)\
**Post date:** [December 22, 2010, 9:19am UTC](https://community.ciphermail.com/t/cannot-create-external-user-certificate-with-e-mail-enabled/153/4 "2010-12-22T09:19:11Z")

</div>

Uhh, sorry.

Please ignore the latest mail, simply fat-fingered with too less coffee.

Regards

Andreas
